6.22. urban.nml

This file contains two namelists called JULES_URBAN_SWITCHES and JULES_URBAN2T_PARAM.

This section predominantly sets the options available for the two-tile urban scheme MORUSES. These namelists are only read if l_urban2t, which requires both the urban_canyon and urban_roof surface types to be used. MORUSES provides parameters for: snow free canyon albedo (l_moruses_albedo), canyon emissivity (l_moruses_emissivity), roughness length for heat (l_moruses_rough), roughness length for momentum (l_moruses_macdonald) and thermal inertia (l_moruses_storage). Ancillary data, predominantly required for MORUSES, is read in via URBAN_PROPERTIES.

For all other parameters that MORUSES does not provide, and for any MORUSES parametrisations that are turned off, values from nveg_params.nml will be used instead. See the switches below for more information.

See also

References:

• Porson, A., et al. (2010), Implementation of a new urban energy budget scheme in the MetUM. Part I: Description and idealized simulations, Quarterly Journal of the Royal Meteorological Society, 136: 1514-1529. doi: 10.1002/qj.668
• Porson, A., et al. (2010), Implementation of a new urban energy budget scheme into MetUM. Part II: Validation against observations and model Intercomparison, Quarterly Journal of the Royal Meteorological Society, 136: 1530-1542. doi: 10.1002/qj.572

6.22.1. JULES_URBAN_SWITCHES namelist members

JULES_URBAN_SWITCHES::l_moruses_albedo

Type:logical Default:F

MORUSES switch for effective canyon albedo parameterisation (snow free).

TRUE

Use MORUSES parameterisation. Requires that l_cosz = TRUE.

FALSE

The snow free canyon albedo is taken from albsnf_nvg_io.

In all cases the snow covered albedo is albsnc_nvg_io. MORUSES does not parameterise the roof albedo, so this is also taken from albsnf_nvg_io.

JULES_URBAN_SWITCHES::l_moruses_emissivity

Type:logical Default:F

MORUSES switch for effective canyon emissivity parameterisation.

TRUE

Use MORUSES parameterisation.

FALSE

The canyon emissivity is taken from emis_nvg_io.

In either case, the roof emissivity is taken from emis_nvg_io.

JULES_URBAN_SWITCHES::l_moruses_rough

Type:logical Default:F

MORUSES switch for effective roughness length for heat parameterisation.

TRUE

Use MORUSES parameterisation for canyon and roof.

FALSE

Values for canyon and roof are taken from z0_nvg_io and z0hm_nvg_io.

JULES_URBAN_SWITCHES::l_moruses_storage

Type:logical Default:F

MORUSES switch for thermal inertia and coupling with the underlying soil for canyon and roof.

MORUSES consists of two surfaces; a canyon (urban_canyon) and a roof (urban_roof). This MORUSES parametrisation calculates the heat capacity of each of these surface types and also modifies how they are coupled with the underlying soil. The heat capacities of the canyon and roof are calculated using the properties of the urban fabric and the geometry of the canyon. The roof has a lower thermal inertia and can respond more rapidly to changes in forcing. The nature of the coupling (radiative, conductive or none) is controlled via vf_nvg_io as descibed below.

The canyon: Consists of two walls and a road where the road only is coupled to the underlying soil. The walls are uncoupled and have a zero-flux boundary condition. The coupling of the road is therefore parametrised using a canyon scaling factor. The nature of the canyon (or road surface) coupling is specified as follows:

vf_nvg_io (urban_canyon):

0	conductively coupled
1	radiatively coupled

The roof: As the roof is not in direct contact with the soil, it physically cannot be conductively coupled. It can either be radiatively coupled or uncoupled. To allow for no coupling, MORUSES modifies the code to change the meaning of conductively coupled to NOT coupled. The nature of the coupling is therefore specified as follows:

vf_nvg_io (urban_roof):

0	NOT coupled
1	radiatively coupled

TRUE

Use MORUSES parameterisation as described above.

FALSE

Values for canyon and roof are taken from ch_nvg_io and vf_nvg_io (with no modifications to coupling).

JULES_URBAN_SWITCHES::l_moruses_storage_thin

Type:logical Default:F

MORUSES switch to use a thin roof to simulate the effects of insulation.

Only used if l_moruses_storage = TRUE.

TRUE

Use thin, insulated roof.

FALSE

Use damping depth diffusivity of roofing materials.

JULES_URBAN_SWITCHES::l_moruses_macdonald

Type:logical Default:F

MORUSES switch for using MacDonald et al. (1998) to calculate effective roughness length of urban areas and displacement height from urban geometry.

TRUE

Use MacDonald et al. (1998) formulations.

FALSE

Appropriate data needs to be supplied instead.

Note

If l_urban_empirical = TRUE then l_moruses_macdonald should also be TRUE, to keep the roughness length and displacement height consistent with the morphology.

See also

References:

• Macdonald RW, Griffiths RF, Hall D. 1998. An improved method for the estimation of surface roughness of obstacle arrays. Atmos. Env. 32: 1857-1864

JULES_URBAN_SWITCHES::l_urban_empirical

Type:logical Default:F

Switch to use empirical relationships for urban geometry, based on total urban fraction. Dimensions calculated are W/R, H/W and H.

If no MORUSES parametrisations are used, i.e. the basic URBAN-2T, then only W/R is required.

If the roof fraction is not supplied i.e. canyon fraction = total urban fraction, then W/R will be used to calculate the canyon and roof fractions. W/R is also used to distribute anthropogenic heat between the roof and the canyon if l_anthrop_heat_src = TRUE.

TRUE

Use empirical relationships for urban geometry.

FALSE

Appropriate data needs to be supplied instead.

Warning

These are only valid for high resolutions (~1 km).

See also

References:

• Bohnenstengel SI, Evans S, Clark P, Belcher SE (2010). Simulations of the London urban heat island, Quarterly Journal of the Royal Meteorological Society (submitted)

6.22.2. JULES_URBAN2T_PARAM namelist members

JULES_URBAN2T_PARAM::anthrop_heat_scale

Type:real Default:1.0

Distribution scaling factor, which allows the anthropogenic heat flux to be spread between the urban_canyon and urban_roof tiles such that:

• H_roof = anthrop_heat_scale x H_canyon
• H_canyon x (W/R) + H_roof x ( 1.0 - W/R ) = anthrop_heat

Has a value between 0.0 and 1.0 where the extremes correspond to:

• 0.0 = all released within the canyon.
• 1.0 = evenly spread between canyon and roof.

Only used if l_anthrop_heat_src = TRUE.