6.22. output.nml

This file contains a variable number of namelists that are used to specify the output required by the user. The namelist JULES_OUTPUT should occur only once at the top of the file. The value of nprofiles in JULES_OUTPUT then determines how many times the namelist JULES_OUTPUT_PROFILE should appear.

6.22.1. JULES_OUTPUT namelist members

JULES_OUTPUT::output_dir
Type:character
Default:None

The directory used for output files. This can be an absolute or relative path.

JULES_OUTPUT::run_id
Type:character
Default:None

A name or identifier for the run. This is used to name output files and model dumps.

JULES_OUTPUT::nprofiles
Type:integer
Permitted:>= 0
Default:0

The number of output profiles that will be specified using instances of the JULES_OUTPUT_PROFILE namelist.

6.22.2. JULES_OUTPUT_PROFILE namelist members

This namelist should occur nprofiles times. Each occurrence of this namelist contains information about a single output profile, as described in JULES output.

JULES_OUTPUT_PROFILE::profile_name
Type:character
Default:None

The name of the output profile.

This is used in file names and should be specified even if there is only one profile. The name for each profile should be unique to avoid overwriting data unintentionally.

Although any name can be used for a profile, the user may which to choose a name that reflects the variables in the file (e.g. ‘carbon’, ‘water’) or the data frequency (e.g. ‘daily’, ‘monthly’).

JULES_OUTPUT_PROFILE::file_period
Type:integer
Permitted:-2, -1 or 0
Default:0

The period for output files, i.e. the time interval during which all output goes to the same file.

Note

In all cases, output during spin-up goes into a separate file for each spin-up cycle and output during the main run goes into its own file(s).

This can be one of three values:

0
All output goes into the same file.
-1
Monthly files are produced (i.e. all output for a month goes into the same file).
-2
Annual files (calendar years) are produced.

Members used to specify the times that the profile will generate output

JULES_OUTPUT_PROFILE::output_spinup
Type:logical
Default:F

Determines whether the profile will provide output during model spin-up.

TRUE
Provide output during spin-up. Output is provided for the whole of the model spin-up. Output from each spin-up cycle goes into separate files.
FALSE
Do not provide any output during spin-up.
JULES_OUTPUT_PROFILE::output_main_run
Type:logical
Default:F

Determines whether the profile will provide output during the main model run (i.e. any part of the run after spin-up).

TRUE
Provide output during the main model run. Output will be provided for all times between output_start and output_end below.
FALSE
Do not provide any output during the main model run.
JULES_OUTPUT_PROFILE::output_initial
Type:logical
Default:F

Determines whether the profile will output initial data for the sections for which it is outputting.

See Initial data for caveats on the initial data file(s) produced.

TRUE

Output initial data for the profile.

If output_spinup = T, an initial data file will be output at the start of each spinup cycle.

If output_main_run = T and output_start = main_run_start, an initial data file will be output at the start of the main run.

FALSE
Do not output any initial data.
JULES_OUTPUT_PROFILE::output_start
JULES_OUTPUT_PROFILE::output_end
Type:character
Default:main_run_start, main_run_end

The time to start and stop collecting data for output. The times that output is actually produced are determined by output_period below.

If output_period is monthly, then output_start must be 00:00:00 on the 1st of some month.

If output_period is yearly, then output_start must be 00:00:00 on the 1st of January for some year.

If output_end is given such that an output period is not complete when the run reaches output_end, output will not be generated for that final period (e.g. if values are being output monthly but output_end is midday on the 31st December, then output will not be generated for December, even though most of December has been run).

The times must be given in the format:

"yyyy-mm-dd hh:mm:ss"
JULES_OUTPUT_PROFILE::sample_period
Type:integer
Permitted:> 1
Default:timestep_len

The sampling period, in seconds, for time-averages, minima, maxima and accumulations.

This must be a factor of the output period and a multiple of the timestep length.

Note

It is strongly recommended that this be left at the default value.

In exceptional cases, sampling every timestep can be relatively expensive and acceptable output can be achieved by sampling less frequently. For example, with a large domain, many output diagnostics and a timestep of 30 minutes, a monthly average would be calculated from several hundred values if every timestep was used. For variables that evolve relatively slowly, an acceptable monthly average might be obtained by sampling only every 12 hours.

If fields are not sampled every timestep, the averages/minima/maxima/accumulations will only be approximations.

JULES_OUTPUT_PROFILE::output_period
Type:integer
Permitted:-2, -1 or > 1
Default:timestep_len

The period for output, in seconds.

This must be a multiple of the timestep length, except for the special cases:

-1: Monthly period
-2: Annual period

Members used to specify the variables that the profile will output

JULES_OUTPUT_PROFILE::nvars
Type:integer
Permitted:>= 0
Default:0

The number of variables that the profile will provide output for.

The variables available for output are given in JULES Output variables.

JULES_OUTPUT_PROFILE::var
Type:character(nvars)
Default:None

List of variable names to output, as recognised by JULES (see JULES Output variables). Names are case sensitive.

JULES_OUTPUT_PROFILE::var_name
Type:character(nvars)
Default:‘’ (empty string)

For each variable specified in var, this is the name to give the variable in output files.

If the empty string (the default) is given for any variable, then the corresponding value from var is used instead.

JULES_OUTPUT_PROFILE::output_type
Type:character(nvars)
Default:‘S’

For each variable specified in var, this indicates the type of processing required.

Recognised values are:

S
Instantaneous or snapshot value.
M
Time mean value.
N
Time minimum value.
X
Time maximum value.
A
Accumulation over time.

For time average/minimum/maximum variables, the period over which each output value is calculated is given by output_period. For time-accumulation variables, output_period gives the period for output of an updated accumulation (i.e. how often the value is reported). For time averages, minima, maxima and accumulations, the sampling frequency is given by sample_period.

Note

A time-accumulation is initialised at the start of a run and thereafter accumulates until the end of the run. This may mean that accuracy is lost, particularly towards the end of long runs, if small increments are added to an already large sum.

6.22.3. Example of requesting output

In this example, the user has requested two output profiles. One provides gridbox monthly means for the whole of the main run, the other provides snapshot values of per-tile variables every timestep for a single year. We assume that timestep_len = 1800, main_run_start = ‘1995-01-01 00:00:00’ and main_run_end = ‘2005-01-01 00:00:00’, so that exactly 10 years will be run. There is no spin-up.

&JULES_OUTPUT
  run_id = "jules_run001",

  output_dir = "./output",

  nprofiles = 2
/

&JULES_OUTPUT_PROFILE
  profile_name = "month",

  output_main_run = T,

  output_period = -1,

  nvars = 4,
  var         =    "emis_gb"        "ftl_gb"  "snow_mass_gb"  "tstar_gb",
  var_name    = "Emissivity"  "SensibleHeat"      "SnowMass"      "Temp",
  output_type =          'M'             'M'             'M'         'M'
/

&JULES_OUTPUT_PROFILE
  profile_name = "tstep",

  output_main_run = T,
  output_start    = "2000-01-01 00:00:00",
  output_end      = "2001-01-01 00:00:00",

  nvars = 4,
  var         = "emis"  "ftl"  "snow_mass"  "tstar",
  output_type =    'S'    'S'          'S'      'S'
/

Or using the alternative list syntax (see Introduction to Fortran namelists):

&JULES_OUTPUT
  # ... as above ...
/

&JULES_OUTPUT_PROFILE
  # ... as above ...

  nvars = 4,
  var(1) = "emis_gb",       var_name(1) = "Emissivity",    output_type(1) = 'M',
  var(2) = "ftl_gb",        var_name(2) = "SensibleHeat",  output_type(2) = 'M',
  var(3) = "snow_mass_gb",  var_name(3) = "SnowMass",      output_type(3) = 'M',
  var(4) = "tstar_gb",      var_name(4) = "Temp",          output_type(4) = 'M'
/

&JULES_OUTPUT_PROFILE
  # ... as above ...

  nvars = 4,
  var(1) = "emis",       output_type(1) = 'S',
  var(2) = "ftl",        output_type(2) = 'S',
  var(3) = "snow_mass",  output_type(3) = 'S',
  var(4) = "tstar",      output_type(4) = 'S'
/

The JULES_OUTPUT namelist is simple - it gives an id for the run, specifies the directory to put output in and specifies the number of profile definitions that follow.

Each profile is given a unique name. Both profiles want to output part of the main run, so must set output_main_run to TRUE. Since sample_period is not given for either profile, both will use the default (sample every timestep). The same is true for file_period - since it is not given for either profile, it takes its default value and all output for each profile will go into a single file.

The first output profile wants to output monthly averages, so output_period is set to -1 (the special value indicating that calendar months should be used for the output period) and output_type is set to ‘M’ (for mean) for each variable. The user wants this profile to output for the whole of the main run, so does not need to specify output_start or output_end (note that this is only possible because the main run starts at 00:00:00 on the 1st of a month - if this was not the case, the user would have to specify a different time for output_start). The user has also chosen to supply the names that each variable will use in output files using var_name.

The second output profile has specified a section of the main run that it will provide output for using output_start and output_end such that exactly a year of data will be output. Since output_period is not specified, it takes its default value, and output will be produced every timestep. The user has not specified the names to use in output files for this profile, so the values from var will be used.