10. JULES Output variables

Variables that are available for output from JULES are listed in this section, separated according to their type.

Note

All output is on the full model grid (even for variables defined on land points only).

Any points on the grid for which a variable is not defined with be filled with a missing data value.

10.1. Variables that have a single value at each gridpoint (land and sea)

Name	Description
con_rain	Gridbox convective rainfall (kg m-2 s-1).
con_snow	Gridbox convective snowfall (kg m-2 s-1).
cosz	Cosine of the zenith angle (-).
diff_frac	Gridbox fraction of radiation that is diffuse (-).
ecan_gb	Gridbox mean evaporation from canopy/surface store (kg m-2 s-1).
ei_gb	Gridbox sublimation from lying snow or sea-ice (kg m-2 s-1).
esoil_gb	Gridbox surface evapotranspiration from soil moisture store (kg m-2 s-1).
et_stom_gb	Gridbox transpiration (kg m-2 s-1).
fqw_gb	Gridbox moisture flux from surface (kg m-2 s-1).
ftl_gb	Gridbox surface sensible heat flux (W m-2).
land_albedo_1	Gridbox band 1 albedo (direct beam visible).
land_albedo_2	Gridbox band 2 albedo (diffuse visible).
land_albedo_3	Gridbox band 3 albedo (direct beam NIR).
land_albedo_4	Gridbox band 4 albedo (diffuse NIR).
latent_heat	Gridbox surface latent heat flux (W m-2).
ls_rain	Gridbox large-scale rainfall (kg m-2 s-1).
ls_snow	Gridbox large-scale snowfall (kg m-2 s-1).
lw_down	Gridbox surface downward LW radiation (W m-2).
precip	Gridbox precipitation rate (kg m-2 s-1).
pstar	Gridbox surface pressure (Pa).
q1p5m_gb	Gridbox specific humidity at 1.5m height (kg kg-1).
qw1	Gridbox specific humidity (total water content) (kg kg-1).
rainfall	Gridbox rainfall rate (kg m-2 s-1).
snomlt_surf_htf	Gridbox heat flux used for surface melting of snow (W m-2).
snowfall	Gridbox snowfall rate (kg m-2 s-1).
snow_mass_gb	Gridbox snowmass (kg m-2).
surf_ht_flux_gb	Gridbox net downward heat flux at surface over land and sea-ice fraction of gridbox (W m-2).
sw_down	Gridbox surface downward SW radiation (W m-2).
t1p5m_gb	Gridbox temperature at 1.5m height (K).
taux1	Gridbox westerly component of surface wind stress (N m-2).
tauy1	Gridbox southerly component of surface wind stress (N m-2).
tl1	Gridbox ice/liquid water temperature (K).
tstar_gb	Gridbox surface temperature (K).
u1	Gridbox westerly wind component (m s-1).
u10m	Gridbox westerly wind component at 10 m height (m s-1).
v1	Gridbox southerly wind component (m s-1).
v10m	Gridbox southerly wind component at 10m height (m s-1).
wind	Gridbox wind speed (m s-1).

10.2. Variables that have a single value at each land gridpoint

Name	Description
albedo_land	Gridbox albedo (as used to calculate net shortwave radiation) (-).
NDVI_land	Gridbox NDVI (using sum of direct and diffuse for (NIR-VIS)/(NIR+VIS)).
canopy_gb	Gridbox canopy water content (kg m-2).
cs_gb	Gridbox total soil carbon (kg m-2).
cv	Gridbox mean vegetation carbon at end of model timestep (kg m-2).
c_bio_gb	Gridbox soil carbon in biomass pool (kg m-2). Only available if soil_bgc_model = 2 or 3.
c_dpm_gb	Gridbox soil carbon in decomposable plant material pool (kg m-2). Only available if soil_bgc_model = 2 or 3.
c_hum_gb	Gridbox soil carbon in humus pool (kg m-2). Only available if soil_bgc_model = 2 or 3.
c_rpm_gb	Gridbox soil carbon in resistant plant material pool (kg m-2). Only available if soil_bgc_model = 2 or 3.
deposition_n	Nitrogen deposition (kg m-2 s-1).
depth_frozen	Gridbox depth of frozen ground at surface defined from soil temperature (m).
depth_frozen_sthf	Gridbox depth of frozen ground at surface defined from soil moisture (m). Recommended over depth_frozen except where the soil is very dry.
depth_unfrozen	Gridbox depth of unfrozen ground at surface defined from soil temperature (m).
depth_unfrozen_sthf	Gridbox depth of unfrozen ground at surface defined from soil moisture (m). Recommended over depth_unfrozen except where the soil is very dry.
dpm_ratio	Gridbox DPM:RPM ratio of overall litter input (:).
drain	Gridbox drainage at bottom of soil column (kg m-2 s-1).
elake	Gridbox mean evaporation from lakes (kg m-2 s-1).
emis_gb	Gridbox emissivity.
exudates_gb	Gridbox exudates: excess carbon not assimilable into plant due lack of nitrogen (kg m-2 (360days)-1).
fch4_wetl	Gridbox scaled methane flux from wetland fraction using soil carbon as substrate if ch4_substrate=1, NPP as substrate if ch4_substrate=2, or soil respiration as substrate if ch4_substrate=3. (10-9 kg m-2 s-1).
fch4_wetl_cs	Gridbox methane flux from wetland fraction using soil carbon as substrate (kg m-2 s-1).
fch4_wetl_npp	Gridbox methane flux from wetland fraction using NPP as substrate (kg m-2 s-1).
fch4_wetl_resps	Gridbox methane flux from wetland fraction using soil respiration as substrate (kg m-2 s-1).
fsat	Gridbox surface saturated fraction (-).
fsmc_gb	Gridbox soil moisture availability factor (beta) (-).
fwetl	Gridbox wetland fraction at end of model timestep (-).
gpp_gb	Gridbox gross primary productivity of biomass expressed as carbon (kg m-2 s-1).
gs	Gridbox surface conductance to evaporation (m s-1).
hf_snow_melt	Gridbox snowmelt heat flux (W m-2).
harvest_gb	Gridbox flux of carbon to product pools due to harvest (kg C m-2 (360days)-1).
harvest_n_gb	Gridbox flux of nitrogen to atmosphere due to harvest (kg N m-2 (360days)-1).
immob_n_pot_gb	Gridbox mean potential soil nitrogen immobilisation (kg m-2 (360days)-1).
immob_n_gb	Gridbox mean soil nitrogen immobilisation (kg m-2 (360days)-1).
land_index	Index (gridbox number) of land points.
lice_index	Index (gridbox number) of land ice points.
lit_c_mean	Gridbox mean carbon litter (kg m-2 (360days)-1).
lit_n_t	Gridbox mean total nitrogen litter (kg m-2 (360days)-1).
lw_net	Gridbox surface net LW radiation (W m-2).
lw_up	Gridbox surface upward LW radiation (W m-2).
minl_n_pot_gb	Gridbox mean potential soil nitrogen mineralisation (kg m-2 (360days)-1).
minl_gb	Gridbox mean soil nitrogen mineralisation (kg m-2 (360days)-1).
npp_gb	Gridbox net primary productivity of biomass expressed as carbon prior to nitrogen limitation (kg m-2 s-1).
npp_n_gb	Gridbox net primary productivity of biomass expressed as carbon after nitrogen limitation (kg m-2 (360days)-1).
ns_gb	Gridbox soil organic nitrogen (kg m-2). Only available if soil_bgc_model = 2 or 3.
n_amm_gb	Gridbox soil nitrogen in ammonium pool (kg m-2). Only available if soil_bgc_model = 3.
n_bio_gb	Gridbox soil nitrogen in biomass pool (kg m-2). Only available if soil_bgc_model = 2 or 3.
n_demand_gb	Gridbox mean demand for nitrogen (kg m-2 (360days)-1).
n_dpm_gb	Gridbox soil nitrogen in decomposable plant material pool (kg m-2). Only available if soil_bgc_model = 2 or 3.
n_fertiliser_gb	Gridbox nitrogen addition from fertiliser (kg N m-2 (360days)-1).
n_fix_gb	Gridbox mean nitrogen fixed by plants (kg m-2 (360days)-1).
n_gas_gb	Gridbox mean mineralised nitrogen gas emissions (kg m-2 (360days)-1).
n_hum_gb	Gridbox soil nitrogen in humus pool (kg m-2). Only available if soil_bgc_model = 2 or 3.
n_inorg_gb	Gridbox soil inorganic nitrogen (kg m-2). Only available if soil_bgc_model = 2 or 3.
n_leach	Gridbox leached nitrogen loss term (kg N m-2 s-1).
n_loss	Gridbox nitrogen loss term (fixed fraction of n_inorg) (kg N m-2 (360days)-1).
n_nit_gb	Gridbox soil ammonium in ammonium pool (kg m-2). Only available if soil_bgc_model = 3.
n_rpm_gb	Gridbox soil nitrogen in resistant plant material pool (kg m-2). Only available if soil_bgc_model = 2 or 3.
n_soil_gb	Gridbox total soil nitrogen (organic and inorganic) (kg m-2). Only available if soil_bgc_model = 2 or 3.
n_uptake_gb	Gridbox total nitrogen uptake by plants (kg N m-2 (360days)-1). Only available if soil_bgc_model = 2 or 3.
n_veg_gb	Gridbox mean plant nitrogen content: n_leaf+n_root+n_wood from carbon equivalents (kg m-2 ).
qbase	Gridbox baseflow (lateral subsurface runoff) (kg m-2 s-1).
qbase_zw	Gridbox baseflow (lateral subsurface runoff) from deep layer (kg m-2 s-1).
rad_net	Surface net radiation (W m-2).
resp_p_gb	Gridbox plant respiration carbon flux (kg m-2 s-1).
resp_s_gb	Gridbox total soil respiration carbon flux (kg m-2 s-1).
resp_s_to_atmos_gb	Respired carbon from soil carbon emitted to atmosphere (kg m-2 s-1).
resp_s_dr_out	Gridbox mean soil respiration carbon flux for driving TRIFFID (kg m-2 (360days)-1) This is the gross soil respiration, some of this carbon flux is from one soil carbon pool to another.
root_abandon_gb	Carbon from roots abandoned during landuse change to soil kg C m-2 (360days)-1).
root_abandon_n_gb	Nitrogen from roots abandoned during landuse change to soil kg N m-2 (360days)-1).
runoff	Gridbox runoff rate (kg m-2 s-1).
rflow	Gridbox river flow rate (kg m-2 s-1).
rrun	Gridbox runoff rate, following river routing (kg m-2 s-1).
sat_excess_roff	Gridbox saturation excess runoff rate (kg m-2 s-1).
smc_avail_top	Gridbox available moisture in surface layer of depth given by zsmc (kg m-2). Calculated using sm_wilt from JULES_SOIL_PROPS.
smc_avail_tot	Gridbox available moisture in soil column (kg m-2). Calculated using sm_wilt from JULES_SOIL_PROPS.
smc_tot	Gridbox total soil moisture in column (kg m-2).
snomlt_sub_htf	Gridbox sub-canopy snowmelt heat flux (W m-2).
snow_can_gb	Gridbox snow on canopy (kg m-2).
snow_depth_gb	Gridbox depth of snow (m).
snow_frac	Gridbox snow-covered fraction of land points (-).
snow_grnd_gb	Gridbox average snow beneath canopy (snow_grnd) (kg m-2).
snow_ice_gb	Gridbox frozen water in snowpack (kg m-2). Only available if nsmax > 0.
snow_liq_gb	Gridbox liquid water in snowpack (kg m-2). Only available if nsmax > 0.
snow_melt_gb	Gridbox rate of snowmelt (kg m-2 s-1).
soil_cn_gb	Gridbox total soil carbon : nitrogen ratio.
soil_index	Index (gridbox number) of soil points.
sthzw	Soil wetness in the deep (water table) layer (-).
sub_surf_roff	Gridbox sub-surface runoff (kg m-2 s-1).
surf_roff	Gridbox surface runoff (kg m-2 s-1).
swet_liq_tot	Gridbox unfrozen soil moisture as fraction of saturation (-).
swet_tot	Gridbox soil moisture as fraction of saturation (-).
sw_net	Gribox net shortwave radiation at the surface (W m-2).
tfall	Gridbox throughfall (kg m-2 s-1).
trad	Gridbox effective radiative temperature (K).
zw	Gridbox mean depth to water table (m).
clay	Gridbox soil clay content (g/g).
isoprene_gb	Gridbox mean isoprene emission flux (kg m-2 s-1).
terpene_gb	Gridbox mean monoterpene emission flux (kg m-2 s-1).
methanol_gb	Gridbox mean methanol emission flux (kg m-2 s-1).
acetone_gb	Gridbox mean monoterpene emission flux (kg m-2 s-1).
frac_agr	Fractional area of agricultural land in each gridbox. If l_trif_crop is TRUE, frac_agr is the fractional area of crop land in each gridbox.
frac_past	Fractional area of pasture land in each gridbox.
co2_mmr	Concentration of atmospheric CO2, expressed as a mass mixing ratio.
frac_agr_prev	Fractional area of agricultural land at the previous timestep.
wood_prod_fast	Carbon content of the fast decay-rate wood product pool (kg m-2).
wood_prod_med	Carbon content of the medium decay-rate wood product pool (kg m-2).
wood_prod_slow	Carbon content of the slow decay-rate wood product pool (kg m-2).
WP_fast_in	Carbon flux from vegetation to the fast decay-rate wood product pool (kg m-2 [360days]-1).
WP_med_in	Carbon flux from vegetation to the medium decay-rate wood product pool (kg m-2 [360days]-1).
WP_slow_in	Carbon flux from vegetation to the slow decay-rate wood product pool (kg m-2 [360days]-1).
WP_fast_out	Carbon flux from the fast decay-rate wood product pool to atmosphere (kg m-2 [360days]-1).
WP_med_out	Carbon flux from the medium decay-rate wood product pool to atmosphere (kg m-2 [360days]-1).
WP_slow_out	Carbon flux from the slow decay-rate wood product pool to atmosphere (kg m-2 [360days]-1).
irrig_water	Irrigation water demand (for l_irrig_dmd = T). (kg m-2 s-1).
fire_mcarthur	McArthur Forest Fire Danger Index (No units)
fire_canadian	Canadian Fire Weather Index (No units).
fire_canadian_ffmc	Canadian Fire Weather Index- Fine Fuel Moisture Code (No units).
fire_canadian_dmc	Canadian Fire Weather Index- Duff Moisture Code (No units).
fire_canadian_dc	Canadian Fire Weather Index- Drought Code (No units).
fire_canadian_isi	Canadian Fire Weather Index- Initial Spread Index (No units).
fire_canadian_bui	Canadian Fire Weather Index- Build-up Index (No units).
fire_nesterov	Nesterov Fire Index (No units).
cnsrv_carbon_veg2	Error in land carbon conservation in veg2 routine (kg m-2)
cnsrv_carbon_triffid	Error in land carbon conservation in triffid routine (kg m-2)
cnsrv_veg_triffid	Error in vegetation carbon conservation in triffid routine (kg m-2)
cnsrv_soil_triffid	Error in soil carbon conservation in triffid routine (kg m-2)
cnsrv_prod_triffid	Error in wood product carbon conservation in triffid routine (kg m-2)
cnsrv_nitrogen_triffd	Error in land nitrogen conservation in triffid routine (kg m-2)
cnsrv_vegN_triffid	Error in vegetation nitrogen conservation in triffid routine (kg m-2)
cnsrv_soilN_triffid	Error in soil nitrogen conservation in triffid routine (kg m-2)
cnsrv_n_inorg_triffid	Error in inorganic nitrogen conservation in triffid routine (kg m-2)
burnt_area_gb	Gridbox mean burnt area fraction (s-1).
emitted_carbon_gb	Gridbox mean emitted carbon flux (kg m-2 s-1).
emitted_carbon_DPM	Decomposable Plant Material emitted carbon flux (kg m-2 s-1).
emitted_carbon_RPM	Resistant Plant Material emitted carbon flux (kg m-2 s-1).
fire_em_CO2_gb	Gridbox mean fire CO2 emission flux (kg m-2 s-1).
fire_em_CO2_DPM	Decomposable Plant Material fire CO2 emission flux (kg m-2 s-1).
fire_em_CO2_RPM	Resistant Plant Material fire CO2 emission flux (kg m-2 s-1).
fire_em_CO_gb	Gridbox mean fire CO emission flux (kg m-2 s-1).
fire_em_CO_DPM	Decomposable Plant Material fire CO emission flux (kg m-2 s-1).
fire_em_CO_RPM	Resistant Plant Material fire CO emission flux (kg m-2 s-1).
fire_em_CH4_gb	Gridbox mean fire CH4 emission flux (kg m-2 s-1).
fire_em_CH4_DPM	Decomposable Plant Material fire CH4 emission flux (kg m-2 s-1).
fire_em_CH4_RPM	Resistant Plant Material fire CH4 emission flux (kg m-2 s-1).
fire_em_NOx_gb	Gridbox mean fire NOx emission flux (kg m-2 s-1).
fire_em_NOx_DPM	Decomposable Plant Material fire NOx emission flux (kg m-2 s-1).
fire_em_NOx_RPM	Resistant Plant Material fire NOx emission flux (kg m-2 s-1).
fire_em_SO2_gb	Gridbox mean fire SO2 emission flux (kg m-2 s-1).
fire_em_SO2_DPM	Decomposable Plant Material fire SO2 emission flux (kg m-2 s-1).
fire_em_SO2_RPM	Resistant Plant Material fire SO2 emission flux (kg m-2 s-1).
fire_em_OC_gb	Gridbox mean fire OC emission flux (kg m-2 s-1).
fire_em_OC_DPM	Decomposable Plant Material fire OC emission flux (kg m-2 s-1).
fire_em_OC_RPM	Resistant Plant Material fire OC emission flux (kg m-2 s-1).
fire_em_BC_gb	Gridbox mean fire BC emission flux (kg m-2 s-1).
fire_em_BC_DPM	Decomposable Plant Material fire BC emission flux (kg m-2 s-1).
fire_em_BC_RPM	Resistant Plant Material fire BC emission flux (kg m-2 s-1).
fao_et0	FAO Penman-Monteith evapotranspiration for reference crop (kg m-2 s-1)

10.3. Variables that have a value for each PFT at each land gridpoint

Name	Description
c_veg	PFT total carbon content of the vegetation at end of model timestep (kg m-2).
canht	PFT canopy height (m).
exudates	PFT exudates - excess carbon not assimilable into plant due lack of nitrogen availability (kg C m-2 (360days)-1).
flux_o3_stom	PFT flux of O3 to stomata (mol m-2 s-1).
fsmc	PFT soil moisture availability factor (-).
g_leaf	PFT leaf turnover rate ([360days]-1).
g_leaf_day	PFT mean leaf turnover rate for input to PHENOL ([360days]-1).
g_leaf_dr_out	PFT mean leaf turnover rate for driving TRIFFID ([360days]-1).
g_leaf_phen	PFT mean leaf turnover rate over phenology period([360days]-1).
gpp	PFT gross primary productivity of biomass expressed as carbon (kg m-2 s-1).
harvest	flux of carbon to product pools due to harvest (kg C m-2 (360days)-1).
harvest_n	flux of nitrogen to atmosphere due to harvest (kg N m-2 (360days)-1).
lai	PFT leaf area index (-).
lai_bal	PFT balanced leaf area index in sf_stom (-).
lai_phen	PFT leaf area index after phenology (-).
leafC	PFT carbon in leaf biomass (kg m-2 ).
leaf_litC	PFT litter carbon due to leaf turnover (kg m-2 )(360days)-1).
leaf_litN	PFT litter nitrogen due to leaf turnover (kg m-2 )(360days)-1).
lit_c	PFT carbon litter (kg m-2 (360days)-1).
lit_c_ag	PFT carbon litter from LU/agriculture (kg C m-2 (360days)-1).
lit_c_orig	PFT carbon litter including LU (kg C m-2 (360days)-1).
lit_n	PFT nitrogen litter (kg N m-2 (360days)-1).
lit_n_ag	PFT nitrogen loss due to LU/agriculture (kg N m-2 (360days)-1).
litterN	PFT local nitrogen litter production (kg N m-2 (360days)-1).
lit_n_orig	PFT nitrogen litter including LU (kg N m-2 (360days)-1).
npp_dr_out	PFT mean NPP of biomass expressed as carbon for driving TRIFFID (kg m-2 (360days)-1).
npp	PFT net primary productivity of biomass expressed as carbon prior to nitrogen limitation (kg m-2 s-1).
npp_n	PFT net primary productivity of biomass expressed as carbon after nitrogen limitation (kg m-2 (360days)-1).
n_demand	PFT total nitrogen demand (kg m-2 (360 days)-1).
n_demand_growth	PFT nitrogen demand for growth of existing plant biomass (kg m-2 (360 days)-1).
n_demand_lit	PFT nitrogen demand of litter: nitrogen lost in leaf, wood and root biomass (kg m-2 (360 days)-1).
n_demand_spread	PFT nitrogen demand for spreading plants across gridbox (kg m-2 (360 days)-1).
n_fertiliser	Nitrogen addition from fertiliser (kg N m-2 (360days)-1).
n_fix	PFT fixed nitrogen (kg N m-2 (360days)-1).
n_leaf	PFT leaf nitrogen scaled by LAI in sf_stom (kg m-2).
n_root	PFT root nitrogen scaled by LAI_BAL in sf_stom (kg m-2).
n_stem	PFT stem nitrogen scaled by LAI in sf_stom; scaled by LAI_BAL if l_stem_resp_fix=T (kg m-2).
n_uptake	PFT nitrogen taken up by plants (kg m-2 (360 days)-1).
n_uptake_growth	PFT nitrogen taken up for growth of existing plant biomass (kg m-2 (360 days)-1).
n_veg	PFT plant nitrogen content N_LEAF+N_ROOT+N_WOOD from carbon equivalents (kg m-2).
o3_exp_fac	PFT ozone exposure factor.
pc_s	PFT net carbon available for spreading in TRIFFID (kg m-2 (360 days)-1).
resp_p	PFT plant respiration carbon flux (kg m-2 s-1).
resp_w_dr_out	PFT mean wood respiration carbon flux for driving TRIFFID (kg m-2 (360days)-1).
resp_l	PFT leaf respiration carbon flux (kg m-2 s-1).
resp_r	PFT root respiration carbon flux (kg m-2 s-1).
resp_w	PFT wood respiration carbon flux (kg m-2 s-1).
root_abandon	PFT carbon flux from roots abandoned during landuse change to soil (kg C m-2 (360days)-1).
root_abandon_n	PFT nitrogen flux from roots abandoned during landuse change to soil (kg N m-2 (360days)-1).
root_litC	PFT litter carbon due to root turnover (kg m-2 )(360days)-1).
root_litN	PFT nitrogen lost as litter due to root turnover (kg m-2 )(360days)-1).
rootC	PFT carbon in root biomass (kg m-2 ).
wood_litC	PFT litter carbon due to wood turnover (kg m-2 )(360days)-1).
wood_litN	PFT litter nitrogen due to wood turnover (kg m-2 )(360days)-1).
woodC	PFT carbon in woody biomass (kg m-2 ).
isoprene	PFT isoprene emission flux (kg m-2 s-1).
terpene	PFT monoterpene emission flux (kg m-2 s-1).
methanol	PFT methanol emission flux (kg m-2 s-1).
acetone	PFT monoterpene emission flux (kg m-2 s-1).
fapar	PFT fraction of absorbed photosynthetically active radiation (-).
burnt_area	PFT burnt area fraction (s-1).
emitted_carbon	PFT emitted carbon flux (kg m-2 s-1).
fire_em_CO2	PFT fire CO2 emission flux (kg m-2 s-1).
fire_em_CO	PFT fire CO emission flux (kg m-2 s-1).
fire_em_CH4	PFT fire CH4 emission flux (kg m-2 s-1).
fire_em_NOx	PFT fire NOx emission flux (kg m-2 s-1).
fire_em_SO2	PFT fire SO2 emission flux (kg m-2 s-1).
fire_em_OC	PFT fire OC emission flux (kg m-2 s-1).
fire_em_BC	PFT fire BC emission flux (kg m-2 s-1).

10.4. Variables that have a value for each crop PFT at each land grid point

These variables are only available when ncpft > 0.

Name	Description
cropdvi	Crop PFT developmental index (DVI).
croprootc	Crop PFT root carbon pool (kg m-2).
cropharvc	Crop PFT carbon in harvested parts (kg m-2).
cropreservec	Crop PFT carbon in stem reserve pool (kg m-2).
croplai	Crop PFT leaf area index (LAI).
cropcanht	Crop PFT canopy height (m).
cropyield	Crop PFT yield carbon (kg m-2). cropyield is zero in every timestep where there is no harvest, so this variable will mostly be used with output_type set to ‘A’ or ‘X’.
harvest_counter	1 in a timestep where crop is harvested, 0 otherwise. When used with output_type = ‘A’, will count the number of harvests since the beginning of the run.
harvest_trigger	Indicates which condition triggered the harvest: No harvest in timestep. Crop reached maturity (DVI=2). Crop leaf area index became too high (LAI>15). Crop has flowered (DVI>1) and temperature in the second soil layer dropped below t_mort_io. Crop has flowered (DVI>1), cropharvc > 0 and (croprootc + cropleafc + cropstemc + cropreservec) < initial_carbon_io. l_prescsow = T, crop has emerged (DVI>=0), and the day of year is the day before the sowing date.
cropstemc	Crop PFT carbon in stem parts (kg m-2).
cropleafc	Crop PFT carbon in leaf parts (kg m-2).
cropsowdate	PFT sowing date (1.0 to 365.0). If l_prescsow = FALSE then this will always be 0.

10.5. Variables that have a value for each tile at each land gridpoint

Name	Description
alb_tile_1	Tile land albedo, waveband 1 (direct beam visible).
alb_tile_2	Tile land albedo, waveband 2 (diffuse visible).
alb_tile_3	Tile land albedo, waveband 3 (direct beam NIR).
alb_tile_4	Tile land albedo, waveband 4 (diffuse NIR).
anthrop_heat	Anthropogenic heat flux for each tile (W m-2).
canopy	Tile surface/canopy water for snow-free land tiles (kg m-2).
catch	Tile surface/canopy water capacity of snow-free land tiles (kg m-2).
ecan	Tile evaporation from canopy/surface store for snow-free land tiles (kg m-2 s-1).
ei	Tile sublimation from lying snow for land tiles (kg m-2 s-1).
emis	Tile emissivity.
esoil	Tile surface evapotranspiration from soil moisture store for snow-free land tile (kg m-2 s-1).
et_stom	Tile transpiration (kg m-2 s-1).
fqw	Tile surface moisture flux for land tiles (kg m-2 s-1).
ftl	Tile surface sensible heat flux for land tiles (W m-2).
gc	Tile surface conductance to evaporation for land tiles(m s-1).
le	Tile surface latent heat flux for land tiles (W m-2).
lw_up_surft	Tile upwelling longwave radiation (W m-2).
lw_down_surft	Tile downwelling longwave radiation (W m-2).
nsnow	Tile number of snow layers (-).
q1p5m	Tile specific humidity at 1.5m over land tiles (kg kg-1).
rad_net_tile	Tile surface net radiation (W m-2).
rgrain	Tile snow surface grain size (μm).
snice_freez_surft	Tile internal refreezing rate in snowpack (kg m-2 s-1).
snice_m_surft	Tile total internal melt rate of snowpack (kg m-2 s-1).
snice_runoff_surft	Tile net rate of liquid leaving snowpack on tiles (kg m-2 s-1).
snice_sicerate_surft	Tile rate of change of solid mass in snowpack (kg m-2 s-1).
snice_sliqrate_surft	Tile rate of change of liquid in snowpack (kg m-2 s-1).
snice_smb_surft	Tile rate of change of snowpack mass (kg m-2 s-1).
snow_can_melt	Tile melt of snow on canopy (kg m-2 s-1).
snow_can	Tile snow on canopy (kg m-2).
snow_depth	Tile snow depth (m).
snow_grnd_rho	Tile bulk density of snow on ground (kg m-3).
snow_grnd	Tile snow on ground below canopy (kg m-2).
snow_ground	Tile snow on ground (snow_tile or snow_grnd depending on configuration) (kg m-2).
snow_ice_tile	Tile total frozen mass in snow on ground (kg m-2). Only available if nsmax > 0.
snow_liq_tile	Tile total liquid mass in snow on ground (kg m-2). Only available if nsmax > 0.
snow_mass	Tile lying snow (total) (kg m-2).
snow_melt	Tile snow melt rate (melt_tile) (kg m-2 s-1).
snow_soil_htf	Tile downward heat flux after snowpack to subsurface” (W m-2).
surf_ht_flux	Downward heat flux for each tile (W m-2).
surf_ht_store	C*(dT/dt) for each tile (W m-2).
sw_net_surft	Tile net shortwave radiation (W m-2).
t1p5m	Tile temperature at 1.5m over land tiles (K).
tstar	Tile surface temperature (K).
tsurf_elev_surft	Tile temperature of elevated subsurface tiles (K).
z0	Tile surface roughness (m).

10.6. Variables that have a value for each surface type at each land gridpoint

Name	Description
frac	Fractional cover of each surface type.
tile_index	Index (gridbox number) of land points with each surface type.

10.7. Variables that have a value for each soil level at each land gridpoint

Name	Description
b	Brooks-Corey exponent for each soil layer (-).
ext	Extraction of water from each soil layer (kg m-2 s-1).
hcap	Dry soil heat capacity (J K-1 m-3) for each soil layer.
hcon	Dry soil thermal conductivity (W m-1 K-1) for each soil layer.
satcon	Saturated hydraulic conductivity (kg m-2 s-1) for each soil layer.
sathh	Saturated soil water pressure (m) for each soil layer.
smcl	Moisture content of each soil layer (kg m-2).
soil_wet	Total moisture content of each soil layer, as fraction of saturation (-).
sthf	Frozen moisture content of each soil layer as a fraction of saturation (-).
sthu	Unfrozen moisture content of each soil layer as a fraction of saturation (-).
sthu_irr	Unfrozen moisture content of each soil layer as a fraction of saturation in irrigated fraction (-) (only available if l_irrig_dmd = T).
t_soil	Sub-surface temperature of each layer (K).
sm_crit	Volumetric moisture content at critical point for each soil layer (-), as given in JULES_SOIL_PROPS.
sm_sat	Volumetric moisture content at saturation for each soil layer (-).
sm_wilt	Volumetric moisture content at wilting point for each soil layer (-), as given in JULES_SOIL_PROPS.

10.8. Variables that have a value for each bedrock layer at each land gridpoint

These variables are only available when l_bedrock = TRUE.

Name	Description
tsoil_deep	Temperature of each bedrock layer (K).

10.9. Variables that have a value for each soil biogeochemistry pool at each soil biogeochemistry layer at each land gridpoint

With the single-pool soil model (soil_bgc_model = 1) there is a single soil carbon pool and a single layer.

If the RothC or ECOSSE models are chosen (soil_bgc_model = 2 or 3) there are 4 soil carbon pools (decomposable plant material, resistant plant material, biomass, humus) for each soil layer.

For RothC, if l_layeredc = TRUE there are sm_levels soil layers (with 4 pools for each), otherwise a single bulk soil layer is used.

For ECOSSE the number of soil layers is dim_cslayer.

Name	Description
cs	Carbon in each soil pool and each soil biogeochemistry layer (kg m-2).
immob_n	Soil nitrogen immobilisation in each soil pool and each soil biogeochemistry layer (kg m-2 (360days)-1).
immob_n_pot	Soil potential nitrogen immobilisation in each soil pool and each soil biogeochemistry layer (kg m-2 (360days)-1).
minl_n	Soil nitrogen mineralisation in each pool soil pool and each soil biogeochemistry layer (kg m-2 (360days)-1).
minl_n_pot	Soil potential nitrogen mineralisation in each pool soil pool and each soil biogeochemistry layer (kg m-2 (360days)-1).
ns	Gridbox organic nitrogen in each soil pool and each soil biogeochemistry layer (kg m-2).
resp_s	Respiration rate from each soil carbon pool each soil biogeochemistry layer (kg m-2 s-1).
soil_CN	Soil C:N in each soil pool and each soil biogeochemistry layer

10.10. Variables that have a value for each soil biogeochemistry layer at each land gridpoint

The number of layers depends on the model set up, as explained in the previous section.

Name	Description
c_bio	Carbon in biomass pool for each soil biogeochemistry layer (kg m-2). Only available if soil_bgc_model = 2 or 3.
c_dpm	Carbon in decomposable plant material pool for each soil biogeochemistry layer (kg m-2). Only available if soil_bgc_model = 2 or 3.
c_hum	Carbon in humus pool for each soil biogeochemistry layer (kg m-2). Only available if soil_bgc_model = 2 or 3.
c_rpm	Carbon in resistant plant material pool for each soil biogeochemistry layer (kg m-2). Only available if soil_bgc_model = 2 or 3.
clay_frac	Clay fraction (kg kg-1) for each soil biogeochemistry layer. Only available if soil_bgc_model = 3.
fN	Nitrogen availability rate modifier for each soil biogeochemistry layer.
n_amm	Nitrogen in ammonium pool for each soil biogeochemistry layer (kg m-2). Only available if soil_bgc_model = 3.
n_bio	Nitrogen in biomass pool for each soil biogeochemistry layer (kg m-2). Only available if soil_bgc_model = 2 or 3.
n_dpm	Nitrogen in decomposable plant material pool for each soil biogeochemistry layer (kg m-2). Only available if soil_bgc_model = 2 or 3.
n_gas	Mineralised nitrogen gas emissions for each soil biogeochemistry layer (kg m-2 (360days)-1).
n_hum	Nitrogen in humus pool for each soil biogeochemistry layer (kg m-2). Only available if soil_bgc_model = 2 or 3.
n_inorg	Inorganic nitrogen pool for each soil biogeochemistry layer (kg m-2 ).
n_nit	Nitrogen in nitrate pool for each soil biogeochemistry layer (kg m-2). Only available if soil_bgc_model = 3.
n_rpm	Nitrogen in resistant plant material pool for each soil biogeochemistry layer (kg m-2). Only available if soil_bgc_model = 2 or 3.
soil_ph	Soil pH for each soil biogeochemistry layer. Only available if soil_bgc_model = 3.

10.11. Variables that have a value for each snow layer on each tile at each land gridpoint

These variables are only available when nsmax > 0.

Name	Description
rgrainl	Grain size in snow layers for each tile (μm).
snow_ds	Depth of each snow layer for each tile (m).
snow_ice	Mass of ice in each snow layer for each tile (kg m-2).
snow_liq	Mass of liquid water in each snow layer for each tile (kg m-2).
tsnow	Temperature of each snow layer (K).